Clear Arp Filter - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IP Commands

clear arp filter

Clears the ARP filter database of all entries.
clear arp filter
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This commands clears all ARP filters configured on the switch. To remove an individual filter entry, use
the no form of the arp filter
Examples
-> clear arp filter
Release History
Release 6.1; command was introduced.
Related Commands
arp filter
show arp summary
MIB Objects
alaIpClearArpFilter
OmniSwitch CLI Reference Guide
command.
Configures an ARP filter to allow or block the processing of speci-
fied ARP Request packets.
Displays the ARP filter configuration.
June 2012 page 14-79