Show Vlan Mvrp - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MVRP Commands

show vlan mvrp

Displays the list of VLANS learned through MVRP and their details.
show vlan mvrp [vlan-id | vlan-range]
Syntax Definitions
vlan-id
vlan-range
Defaults
NA
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
None
Examples
-> show vlan mvrp
vlan type admin oper 1x1
----+-----+-----+----+-----+--------+-------+------+-----+-----+-----------
5 mvrp on
6 mvrp on
output definitions
VLAN
Type
Admin
Oper
stree lxl
stree Flat
OmniSwitch CLI Reference Guide
VLAN ID number you want to display (1-4094)
The VLAN ID range (e.g. 1-10)
stree mble
flat auth
on on on off
on off off off
The VLAN ID. Use the
The type of VLAN (std, vstk, gvrp, mvrp, or ipmv)
VLAN administrative status: on enables VLAN functions to operate;
off disables VLAN functions without deleting the VLAN. Use the
command to change the VLAN administrative status.
VLAN operational status: on (enabled) or off (disabled). The opera-
tional status remains disabled until an active port is assigned to the
VLAN. When the operational status is enabled, then VLAN properties
(e.g. router interfaces, Spanning Tree) are applied to ports and traffic
flow. A VLAN must have an enabled administrative status before it can
become operationally enabled.
Specifies that the MVRP status for the VLAN applies when the switch
is running in the 1x1 MVRP mode.
Specifies that the MVRP status for the VLAN applies when the switch
is running in the flat MVRP mode.
June 2012
ip ipx tag name
NA off off MVRP1
NA off off MVRP12
vlan command to create or remove VLANs.
vlan
page 11-49