Chapter 11 Mvrp Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MVRP (Multiple VLAN Registration Protocol) provides a mechanism for maintaining the contents of
Dynamic VLAN Registration Entries for each VLAN, and for propagating the information they contain to
other Bridges. MVRP uses MRP (Multiple Registration Protocol) as the underlying mechanism, for the
maintenance and propagation of the VLAN information.
MVRP acts as an MRP application, sending and receiving MVRP information encapsulated in an Ethernet
frame on a specific MAC address. MVRP allows both end stations and Bridges in a Bridged Local Area
Network to issue and revoke declarations relating to membership of VLANs. Note that if MVRP is config-
ured on a switch, GVRP cannot be configured on that switch.
A summary of the available commands is listed here:
vlan registration-mode
mvrp
mvrp port
mvrp linkagg
mvrp transparent-switching
mvrp maximum vlan
mvrp registration
mvrp applicant
mvrp timer join
mvrp timer leave
mvrp timer leaveall
mvrp timer periodic-timer
mvrp periodic-transmission
mvrp restrict-vlan-registration
mvrp restrict-vlan-advertisement
mvrp static-vlan-restrict
show mvrp configuration
show mvrp port
show mvrp linkagg
show mvrp timer
show mvrp statistics
show mvrp last-pdu-origin
show vlan registration-mode
show mvrp vlan-restrictions
show vlan mvrp
mvrp clear-statistics
OmniSwitch CLI Reference Guide
11 MVRP Commands
June 2012 page 11-1