Show Interfaces Hybrid Counters Errors - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet Port Commands

show interfaces hybrid counters errors

Displays interface error frame information (for example, CRC errors, transit errors, receive errors) for
combo ports.
show interfaces [slot | slot/port[-port2]] hybrid {fiber |copper} counters errors
Syntax Definitions
slot
slot/port[-port2]
fiber
copper
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
Enter a slot number to display information for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or range of interfaces.
•
These counters do not apply to Gigabit Ethernet traffic.
Examples
-> show interfaces 1/47 hybrid copper counters errors
01/47,
Alignments Errors = 6.45E13,
IfInErrors
Undersize pkts
output definitions
Slot/Port
Alignments Errors
FCS Errors
IfInErrors
IfOutErrors
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper 10/100/1000 RJ-45 port(s) will be
displayed.
FCS Errors = 7.65E12
= 6435346, IfOutErrors= 5543,
= 867568, Oversize pkts = 5.98E8
Interface slot and port number.
Number of Alignments errors.
Number of Frame Check Sequence errors.
Number of received error frames.
Number of transmitted error frames.
June 2012 page 1-117