Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 401

Distributed Spanning Tree Commands
Related Commands
bridge mode
bridge path cost mode
bridge path cost
bridge msti path cost
bridge 1x1 path cost
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPathCost
OmniSwitch CLI Reference Guide
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Selects a 32-bit or automatic path cost mode for the switch.
Implicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports that applies to the specified CIST or
VLAN instance.
Explicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports for an MSTI when the switch is operating
in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree path cost value for
a port or an aggregate of ports for a VLAN instance when the switch is
operating in either the 1x1 or flat mode.
June 2012 page 7-79