Gvrp Maximum Vlan - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

gvrp maximum vlan

Configures the maximum number of dynamic VLANs that can be created by GVRP.
gvrp maximum vlan vlanlimit
Syntax Definitions
vlanlimit
Defaults
parameter
vlanlimit
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command can be used even when GVRP is not enabled on the switch. However, GVRP should be
enabled on the switch for creating dynamic VLANs.
•
If the VLAN limit to be set is less than the current number of dynamically learnt VLANs, then the new
configuration will take effect only after the GVRP is disabled and enabled again on the switch. If this
operation is not done, the VLANs learnt earlier will be maintained.
Examples
-> gvrp maximum vlan 100
Release History
Release 6.2.1; command was introduced.
Related Commands
show gvrp configuration
MIB Objects
alaGvrpMaxVlanLimit
page 10-6
The maximum number of VLANs to be created by GVRP. The valid
range is 32–4094.
default
256
Displays the global configuration for GVRP.
OmniSwitch CLI Reference Guide
GVRP Commands
June 2012