Show Lldp Remote-System Med - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show lldp remote-system med

Displays remote system MED information for a single port or all ports on a slot.
show lldp [slot/port | slot] remote-system [med {network-policy | inventory}]
Syntax Definitions
slot/port
slot
network-policy
inventory
Defaults
By default, a list of all LLDP ports is displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the slot/port or slot parameter to display information for a specific port or for all ports on a specific
module.
Examples
-> show lldp 1/22 remote-system med network-policy
Slot/ Remote
Port ID
------+------+---------------+-----------+---------+------+----------+------
1/22 1
1/22 2
output definitions
Slot/Port
Remote ID
Application Type
page 12-44
Slot number for the module and physical port number on that module
(for example, 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
Display network-policy TLVs from remote Endpoint Devices
Display inventory management TLVs from remote Endpoint Devices
Application Unknown
Type Policy Flag Flag
Voice(01) Defined
Guest Voice(4) Defined
The Slot number to which the remote system entry is associated and the
physical port number on that module.
The Index of the Remote Device.
The Application type of the peer entity.
1. Voice
2. Voice Signaling
3. Guest Voice
4. Guest Voice Signaling
5. Softphone Voice
6. Video Conferencing
7. Streaming Video
8. Video Signaling
Tagged Vlan Layer2
Id Priority
Untagged 345
Untagged 50
OmniSwitch CLI Reference Guide
802.1AB Commands
DSCP
Value
4 34
3 46
June 2012