Lldp Trust-Agent - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1AB Commands

lldp trust-agent

Enables or disables the security mechanism globally (chassis level) or for a slot or a single port. By
enabling LLDP security mechanism on a port, LLDP CMM task brings the LLDP status of the port as
trusted and monitors the port for any LLDP security violation.
lldp {slot/port| slot | chassis} trust-agent {enable | disable} [chassis-id-subtype {chassis-component |
interface-alias | port-component | mac-address | network-address | interface-name | locally-assigned |
any}]
Syntax Definitions
slot/port
slot
chassis
enable
disable
chassis-component
interface-alias
port-component
mac-address
network-address
interface-name
locally-assigned
any
Defaults
'any' - If the chassis ID sub type is not configured for validating the remote agent, by default, the first
remote agent is accepted as a trust agent considering any of the chassis ID sub types.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
The slot number for the module (for example, 3 specifies slot 3)
Specifies all the ports in the chassis.
Enables LLDP security mechanism.
Disables LLDP security mechanism.
The chassis component is used for validating the remote
The alias configured for the interface is used for validating the remote
agent.
The port component is used for validating the remote
The MAC address is used for validating the remote agent.
The network address is used for validating the remote agent.
The interface name is used for validating the remote agent.
The locally assigned component is used for validating the remote agent,
that is the chassis information, which can be locally assigned (the local
configuration)
The remote agent with any chassis ID sub type is accepted as a trust
agent.
June 2012
agent.
agent.
page 12-47