Show Interfaces Hybrid Collisions - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet Port Commands

show interfaces hybrid collisions

Displays interface collision information (for example, number of collisions, number of retries) for combo
ports.
show interfaces [slot | slot/port[-port2]] hybrid {fiber |copper} collisions
Syntax Definitions
slot
slot/port[-port2]
fiber
copper
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
Enter a slot number to display information for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or range of interfaces.
•
These counters do not apply to Gigabit Ethernet traffic.
Examples
-> show interfaces 1/47 hybrid copper collisions
02/01,
Rx Collisions = 6.56E18,
Rx Multiple Collisions = 6325235326,
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper 10/100/1000 RJ-45 port(s) will be
displayed.
Rx Single Collision = 345464364,
Rx Excessive Collisions = 5.65E19
June 2012 page 1-119