Show Lldp Trust-Agent - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1AB Commands

show lldp trust-agent

Displays information of the local LLDP agent or port.
show lldp [slot | slot/port] trust-agent
Syntax Definitions
slot
slot/port
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the slot/port or num (slot number) values to display information for a specific port or for all ports
on a specific module.
•
LLDP trust agent must be enabled globally on the chassis or individually on a port in order to get the
show lldp trust-agent command output correctly.
•
If LLDP security is disabled this command correctly displays the 'Admin Status' as 'Disabled';
however the other output parameters will display their default values.
Examples
-> lldp chassis trust-agent enable
-> lldp chassis trust-agent chassis-id-subtype chassis-component
-> show lldp trust-agent
Slot/Port Admin Status
---------+--------------+-----------------+------------------+-----------------
1/1 Enabled
1/2 Enabled
1/3 Enabled
1/4 Disabled
1/5 Enabled
1/6 Enabled
1/7 Disabled
1/8 Enabled
1/9 Enabled
1/10 Enabled
OmniSwitch CLI Reference Guide
The slot number for the module (for example, 3 specifies slot 3)
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
Violation Action
Trap Only
Trap Only
Trap Only
Shutdown
Shutdown
Trap-and-Shutdown Trusted
Trap-and-Shutdown Violated
Trap Only
Trap Only
Trap Only
June 2012
Violation Status Chassis Subtype
Trusted 1(Chassis Component)
Trusted 1(Chassis Component)
Trusted 1(Chassis Component)
Violated 1(Chassis Component)
Trusted 1(Chassis Component)
1(Chassis Component)
1(Chassis Component)
Trusted 1(Chassis Component)
Trusted 1(Chassis Component)
Trusted 1(Chassis Component)
page 12-53