Show Mvrp Vlan-Restrictions - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

MVRP Commands

show mvrp vlan-restrictions

Displays the VLAN MVRP configuration on a specific port or an aggregate of ports.

show mvrp {port slot/port [– port2] | linkagg agg_num [-agg_num2]} vlan-restrictions

Syntax Definitions

Platforms Supported

OmniSwitch 6400, 6850, 6855, 6850E, 9000E

Usage Guidelines

Use the agg_num or slot/port parameter with this command to display the MVRP statistics for a

specific port.

-> show mvrp port 1/21 vlan-restrictions

---------------+---------------+---------------+-----------

OmniSwitch CLI Reference Guide

The number corresponding to the aggregate group.

The slot number for the module and the physical port number on that

module (e.g., 3/1 specifies port 1 on slot 3).

Registration