Displaying And Maintaining Msdp; Available In Any View - 3Com 5500-EI PWR Install Manual

To do...
Configure to filter imported and
exported SA messages
Configure the minimum TTL
required for a multicast packet
to be sent to the specified
MSDP peer

Displaying and Maintaining MSDP

Displaying and maintaining MSDP
Display the brief information of MSDP
peer state
Display the detailed information of
MSDP peer status
Display the (S, G) state learned from
MSDP peers
Display the number of sources and
groups in the MSDP cache
Reset the TCP connection with the
specified MSDP peer
Clear the cached SA messages
Clear the statistics information of the
specified MSDP peer without resetting
the MSDP peer
Tracing the transmission path of an SA message over the network
Follow these steps to trace the transmission path of an SA message over the network:
To do...
Trace the transmission path of
an SA message over the
network
Trace the transmission path of
messages sent by the multicast
source over the network
peer peer-address sa-policy
{ import | export } [ acl
acl-number ]
peer peer-address
minimum-ttl ttl-value
To do...
msdp-tracert source-address
group-address rp-address [ max-hops
max-hops ] [ next-hop-info | sa-info |
peer-info ]* [ skip-hops skip-hops ]
mtracert source-address [ group-address |
last-hop-router-address group-address ]
Use the command...
Use the command...
display msdp brief
display msdp peer-status
[ peer-address ]
display msdp sa-cache
[ group-address | source-address
| as-number ] *
display msdp sa-count
[autonomous-system-number ]
reset msdp peer peer-address
reset msdp sa-cache
[ group-address ]
reset msdp statistics
[ peer-address ]
Use the command...
14
Remarks
Optional
By default, no filtering is
imposed on SA messages to be
received or forwarded, namely
all SA messages from MSDP
peers are received or
forwarded.
Optional
By default, the value of TTL
threshold is 0.
Remarks

Available in any view

Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in user view
Remarks
You can execute
the msdp-tracert
command in any
view.
You can execute
the mtracert
command in any
view.