Using I/O - Omron K3HB-C User Manual

Section 2 Preparations

2.2 Using I/O

A
Operating Power Supply
100 to 240 VAC
24 VAC/ VDC
*Check the required power
supply type.
Sensor Power Supply/Output
Sensor power supply +
PASS output
<CPB><CPA>
Sensor power supply
N/C
<B> <A> RS-485
<FLK3B>
D
Event Input
Models with Terminal Blocks
<1><3>
N/C
S-TMR
HOLD
RESET
COMPENSATION
COM
Models with Connectors
<2><4>
1: N/C 2: S-TMR
3: HOLD 4: RESET
5: 6: COM
COMPENSATION
7: BANK4 8: BANK2
9: BANK1 10: COM
Applicable Connector (Sold separately)
XG4M-1030 (OMRON)
Special Cable (Sold separately)
K32-DICN (OMRON)
(XG4M-1030 with 3-m cable)
2-4
B
Sensor power supply +
linear output
H (4)
L (2)
<L2B> <L2A>
* No combinations with CPA/CPB
<L1B> <L1A>
other than relay output.
BCD (NPN Open Collector): <BCD>
Applicable Connector (Sold separately)
Sensor power supply +
communications
Special Cable (Sold separately)
RS-232C RS-485 RS-232C
<FLK1B> <FLK3A> <FLK1A>
The BCD COMMON is shared.
The pins indicated in the above diagram as blank (white) boxes have been removed.
*Only one of RS-232C/RS-485 communications, BCD, or DeviceNet can be used by each Digital Indicator.
Pulse Inputs
NPN Open Collector NPN Voltage Pulse
Inputs: K3HB-@NB Inputs: K3HB-@NB
N/C
INA Voltage
INA NPN
N/C
INB Voltage
INB NPN
Note: E3 and E6, Note: E3 and E6,
as well as B6, as well as B6,
are internally are internally
connected. connected.
The following signals depend on the model:
S-TMR: Used by the K3HB-R only.
COMPENSATION: Used by the K3HB-C only.
Terminal Block
A B C D E
C
Relays/Transistors/BCD/DeviceNet
Relay output
Relay output
<C1>
<C2>
HH (5)
H (4)
L (2)
LL (1)
HDR-E50MAG1
(HONDA TSUSHIN KOGYO CO., LTD.)
K32-BCD (OMRON)
(HDR-E50MAG1 with 0.3-m cable)
(3)
HOLD (CMP)
(2)
(5)
(4)
E
PNP Input:
K3HB-@PB
N/C
N/C
INA PNP
N/C
N/C
INB
PNP
Note: E3 and E6,
as well as B5,
are internally
connected.
To E
To D
Transistor output
<T1><T2>
NPN PNP
HH (5)
H (4)
PASS (3)
L (2)
LL (1)
DeviceNet Connector
(Included): DRT <DRT>
(1)
1: V (Power supply cable: Black)
2: CAN L (Communications cable: Blue)
3: Shield
4: CAN H (Communications cable: White)
5: V+ (Power supply cable: Red)
Applicable Connector:
HR31-5.08P-5SC (01)
(HIROSE ELECTRIC CO., LTD.)
* Attach the provided crimp terminals.