Long-distance Right-angle Camera Cable FZ-VSL2 (Two Cables required.) (Two Cameras of the same model are required.) 3D Calibration Tool Illumination High-luminance Pattern Lighting Note: The Intelligent Camera and Autofocus Camera can be connected for 2D measurements. FZD-LTW FZD-LTPW CCTV Lenses FZD-CAL 3Z4S-LE Series...
Page 2
M30.5 P0.5 to vibration. Extension tubes Model 3Z4S-LE-ML-EXR Contents Set of 7 tubes (40 mm, 20 mm, 10 mm, 5 mm, 2.0 mm, 1.0 mm, and 0.5 mm) Maximum outer diameter: 30 mm dia. High-resolution, Low-distortion Lenses Model Lens model...
*1. The 10-m Cable cannot be connected to the FZD-STC2M or FZ-S_ 2M. *2. This Cable has an L-shaped connector on the Camera end. *3. The maximum cable length depends on the Camera being connected, and the model and length of the Cable being used. Xpectia FZD...
Page 4
Parallel I/O 11 inputs (RESET, STEP, DSA, and DI 0 to 7), 26 outputs (RUN, BUSY, GATE, OR, READY, ERROR, STGOUT 0 to 3, and DO 0 to 15) Monitor interface Integrated Controller and LCD 12.1 inch TFT color LCD...
Page 5
*1. Tolerance: ±5% max. The vertical field of vision of camera 0 at an installation distance of 240 mm. *2. When 3D calibration is performed with an OMRON standard target and measurements are taken using the same environment (reference value).
Page 6
L: FZD-CBM 500 mm FZD-CBL 800 mm 1/4 20UNC Cat. No. Q25E-EN-01 In the interest of product improvement, specifications are subject to change without notice. OMRON EUROPE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands Phone: +31 23 568 13 00...