Omron K3HB-C User Manual page 65

Section 5 Functions and Operations
■ Moving between Levels
Adjustment
Measurement stops. Measurement stops.
L
Less than
1 s
Output test
L
Less than
1 s
L
Password
1 s min.
Advanced function
setting
To Protect Level
To Adjustment Level
To Initial Setting Level
Input Adjustment Level,
Display Adjustment Level,
Prescale Level,
Comparative Set Value
Level, Linear Output Level,
Communications Setting
Level, Output Test Level
Advanced Function
Setting Level
5-4
Power ON
L
Less than
1 s
RUN
Measurement starts. Measurement starts.
L
L
1 s min.
3 s min.
L
Less than Input
1 s
adjustment
Initialization
Communications
settings
Linear output
L
Less than
1 s
Press the L [LEVEL] and M [MODE] Keys in RUN level for at least
1 s. The PV display will start to flash. Press the same keys for at least
2 s to move to protect level. Press the L [LEVEL] and M [MODE]
Keys for at least 1 s to return to RUN level.
Press the L [LEVEL] Key in RUN level once (less than 1 s). The level
will change to adjustment level when the key is released.
Use the same operation to return from adjustment level to RUN level.
Press the L [LEVEL] Key in RUN or adjustment level for at least 1 s.
The PV display will start to flash. Press the L [LEVEL] Key for at least
2 s to move to the initial setting level. Press the L [LEVEL] Key for at
least 1 s to return to the RUN level from the initial setting level.
First, move to initial setting level. Press the L [LEVEL] Key in initial
setting level (less than 1 s) each time to move to the next level. Move
to the next level from the output test level to return to the initial setting
level.
A special operation is required to move to the advanced function
setting level. Use the following procedure.
Always displayed, regardless of model or settings.
May not be displayed, depending on the model or
settings.
Level change
L+M
3 s min.
Protect
L+M
1 s min.
L
Less than
1 s
Display
adjustment
Prescale
Comparative
set value
L
Less than
1 s
L
Less than
1 s
L
Less than
1 s