Omron K3HB-C User Manual page 51

Section 3 Basic Application Methods
■ Settings for the K3HB-C
Advanced Function
f)
Setting Level (
L
Initial Setting Level (
Input Adjustment Level
1)
(
L
Display Adjustment Level
2)
(
L
Prescale Level
3)
(
L
3-16
Parameter
Bank
selection
*The Setting Level Protect parameter (set.pt) must be set to 0 (0),
and the Move to Advanced Function Setting Level parameter (amov) to
0169 (-0169) to enable moving to the advanced function setting
level.
0)
L
Parameter
Function
Input type A
Comparative
output pattern
Parameter
Interruption
memory
Parameter
Display value
selection
Parameter
Prescaling bank
Prescale 0AX
Prescale 0AY
Prescale 0
decimal position
Prescale 1AX
Prescale 1AY
Prescale 1
decimal position
Note When prescale bank 0 is set, the prescale 0 settings are
performed next.
Characters Set value
bnk-c ev
Event inputs
Characters Set value
func f3
Pulse counting input
in-ta 00
No-contact (NO)
out-p zone
Zone output
Characters Set value
memo on
Interruption memory ON
Characters Set value
disp pv
Present value
Character Set
s value
ps. bnk 0, 1
ps0. ax 0. 5000
ps0. ay 10 00
dp0 \\\\\
ps1. ax 0. 2500
ps1. ay 10 00
dp1 \\\\\
Remarks
Remarks
Remarks
Remarks
Remarks
Settings for prescale 0
prescale 1 (See note.)
To display two units as
one workpiece, the
prescale = 1/2 = 0.5
0
= 0.5000 10
No decimal point
To display four units as
one workpiece, the
prescale = 1/4 = 0.25
0
= 0.2500 10
No decimal point