Omron K3HB-C User Manual page 102

L
0
L
Displays "L 0." 3 s min.
M
out-p
0
L
nomal
S
out-p
0
L
nomal
U
out-p
0
L
zone
M
0
L
L
123. 4
123. 4
1 s min.
Remarks
5.10 Changing Comparative Output Patterns
Parameter Setting Procedure
The following explanation uses the K3HB-R as an example.
A Press the L [LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
0" is displayed on the level/bank display to indicate the initial
• "
L
setting level.
B Press the M [MODE] Key several times to change the PV display
to "out-p."
C Press the S [SHIFT] Key to make the SV display flash.
• The setting can be changed and the SV display starts to flash.
D Use the U [UP] Key to change the set value.
E Press the M [MODE] Key to switch to the next parameter.
• The set value is registered.
F Press the L [LEVEL] Key for at least 1 s to return to RUN level.
"5.11 Preventing Output Chattering"
"5.12 Outputting for a Set Interval"
"5.13 Delaying Output OFF Timing"
"5.15 Holding Comparative Outputs"
"5.16 Allocating Another Output to PASS Output"
"5.17 Reversing Output Logic"
"5.29 Performing Output Tests"
P.5-42
P.5-44
P.5-46
P.5-49
P.5-51
P.5-53
P.5-74
5-41