Omron K3HB-C User Manual page 68

Power ON Power ON
Comparative
set value HH
Monitor
123.4
status
125.0
HH
Lights
S
* 1
123.4
Change
status
* 2 125.0
*1 If no key is pressed for 5 seconds, the set value is registered and the display returns to monitor status.
*2 Use the S [SHIFT] and U [UP] Keys to set the set value.
Some comparative set values may not be displayed, depending on the
relay/transistor output specifications and settings.
Refer to the parameter setting procedures for information on how to
change comparative set values.
*Outputs of the K3HB-C are given in parentheses.
Comparative
set value H
123.4
124.0
H
Lights
M S M
* 1
123.4
124.0
Displayed Comparative Set Values
Relay/transistor output specifications
H/L Models with Relay Outputs
<C1>
HH/H/L/LL Models with Relays
Outputs <C2>
HH/H/PASS/L/LL Models
with Transistor Outputs
<T1><T2>
None*
* For Sensor Power Supply/Output Models with a PASS Output, the
displayed comparative set value depends on the allocation setting of
the PASS output.
pass (PASS output change)
ll
l
pass
h
hh
"5.16 Allocating Another Output to PASS Output"
* When sv. dsp (comparative set value display) is set to OFF,
comparative set values are not displayed during operation but are
displayed with key operations.
Knowledge Required for Setting Parameters
Comparative Comparative
set value L set value LL
123.4
123.0
L LL
Lights Lights
S M
* 1
123.4
123.0
Displayed comparative set values
HH H
Displayed comparative set value
HH H
123.4
122.0
S
* 1
123.4
M
122.0
L LL
L LL
P.5-51
5-7