No-Measurement" Status - Omron K3HB-C User Manual

"No-Measurement" Status

-----
8
88888
· PV display "-----"
· All outputs OFF
When no measurement value has been determined, a "no-
measurement" status exists. The PV display for no measurement is "-
----" and all outputs are OFF.
A no-measurement status occurs in the following circumstances.
• When power is turned ON during a RESET input or during startup
compensation timer operation.
• Immediately after returning to RUN level from any level other than
the protect and adjustment levels during a RESET input or during
startup compensation timer operation.
* If the HOLD signal turns ON when no measurement has been made,
the no-measurement status is held.

"No-Measurement" Status

A-29