Omron K3HB-C User Manual page 18

Outputs
Comparative output pattern
The comparative output
pattern can be selected as
standard output, zone output,
and level output.
P.5-39
R P C
PASS output change
Comparative results other
than PASS and error signals
can be output from the PASS
output terminal.
P.5-51
R
Output logic
Reverses the output logic of
comparative outputs for
comparative results.
P.5-53
R P C
Linear output
Outputs currents or voltages
proportional to measurement
values as they change.
P.5-57
R P C
Display
Display value selection
The current display value can
be selected from the present
value, the maximum value,
and the minimum value.
P.5-67
R P C
Position meter
Displays the current
measurement value as a position
in relation to the scaling width on
a meter with 20 sections.
P.5-71
R P C
Hysteresis
Prevents comparative output
chattering when the
measurement value fluctuates
slightly near the set value.
P.5-42
Output OFF delay
Connects the comparative output
OFF timing for a set interval.
Comparative output ON times can
be held when comparative results
change quickly.
P.5-46
P
Startup compensation timer
Constant-time measurements
can be stopped by an external
signal input.
P.5-34
Standby sequence
Turns the comparative output
OFF until the measurement
value enters the PASS range.
P.5-55
Display color selection
The PV display color can be
set to either green or red. The
present value color can be
switched according to the
status of comparative outputs.
P.5-69
Scaling
Can convert the input signal to
any display value.
P.5-28
1.1 Main Functions and Features of the K3HB
Output refresh stop
Holds the output status when
comparative results outputs
other than PASS turn ON.
P.5-49
R
Shot output
Produces a constant
comparative output ON time.
P.5-44
R P C
Output test
Output operation can be
confirmed without actual input
signals, by setting test
measurement values using
the keys.
P.5-74
R
R P
Display refresh period
When inputs change quickly,
the display refresh period can
be delayed to reduce
flickering and make the
display easier to read.
P.5-60
R P C
Comparative set value display
The comparative set value
can be set to not display
during operation.
P.5-68
R P C
R P
R P C
R P C
R P C
R P C
1-3