Omron K3HB-C User Manual page 86

■ F3: Pulse Counting Input
Pulses are counted on the rising edge of input A.
The measurement value can be obtained using the following formula:
D = C
C: Count
: Prescale value A
D: Measurement value
Input A
HOLD
1
Count
0
Holding the Measurement Value
Turning ON the HOLD input temporarily stops the cumulative count
and holds the measurement value. The outputs are also held.
Resetting the Display Value
The display value can be zeroed by turning ON the RESET input or
press the MAX/MIN Key for 1 second or longer.
While the RESET input is ON, measurement is not performed, the
display shows "-----", and all outputs are OFF.
Compensation Value Input
Use the compensation input to start measurement from the desired
value. The compensation value must be set in advance.
5.3 Setting the Function for the K3HB-C
5
4
3
2
6
5-25