Connecting The Signal Lines For External Devices - Omron GRT1-CRT - 05-2008 Operation Manual

Connecting the Signal Lines for External Devices

4-5

Connecting the Signal Lines for External Devices

38
Connect the I/O signal lines from the external devices to the I/O terminals on
the SmartSlice I/O Units. The I/O terminals on the SmartSlice I/O Units are
the same type of screwless clamp terminal as on the CompoNet Communica-
tions Unit.
Refer to the GRT1 Series SmartSlice I/O Units Operation Manual (Cat. No.
W455) for more information.
Section 4-5