Verifying The Registration Table - Omron GRT1-CRT - 05-2008 Operation Manual

Registration Table
6-2-2

Verifying the Registration Table

Turn ON pin 1 (REGS) on the DIP switch while the power to the SmartSlice
I/O Terminal is ON.
The CompoNet Communications Unit will read the I/O configuration informa-
tion and make a Registration Table.
The CompoNet Communications Unit will overwrite a previous Registration
Table with the new one.
CompoNet
Communica-
Power ON
tions Unit
Turn ON pin 1.
The CompoNet Communications
Registration Table Unit reads and saves the I/O
configuration information.
• Contents of Registration Table
The Registration Table contains the number of SmartSlice I/O Units and
the I/O size for each Unit.
Unit number
(from the left side)
#1
#2
#3
#4
The CompoNet Communications Unit will verify the Registration Table if the
power turns ON when pin 1 (REGS) on the CompoNet Communications Unit
is ON. The CompoNet Communications Unit automatically compares the
information in the Registration Table with the connected SmartSlice I/O Units.
Turn ON the power
when pin 1 is ON.
Registration Table
Unit number
Number
(from the left I/O
of I/O
side)
#1 Input 4 points
#2 Input
4 points
Output
#3 4 points
#4 Output 2 points
The TS indicator on the CompoNet Communications Unit will flash in red if
there is one or more differences.
#1 #2 #3 #4
4-point
4-point
4-point 2-point
Input Output
Input Output
Unit
Unit Unit Unit
I/O Number of I/O
Input 4 points
Input 4 points
Output 4 points
Output 2 points
CompoNet
Communica-
#1
tions Unit
4-point
Input
Unit
The CompoNet Communications Unit
compares the I/O configuration with the
contents of the Registration Table.
Section 6-2
#2 #3 #4
2-point
4-point 2-point
Output
Output
Input
Unit
Unit
Unit
55