Omron GRT1-CRT - 05-2008 Operation Manual page 139

Standard Models
Model
GRT1-TS2T Two-point Temperature Input Unit
Thermocouple input, Input type: R, S, K, J, T, E, B, N, L, U, W, or PL2
GRT1-CP1-L Positioning Unit with one counter (with encoder A, B, and Z Inputs), 1 digital input, and 2
digital outputs (PNP)
Turnback Unit Connection Cable
Model
GCN2-100
CompoNet Communications Cables
Model
--- Round cable I (2-core VCTF cable)
JIS C 3306, Nominal cross-section (conductor diameter): 0.75 mm
Finished diameter: 2.3 mm
--- Round cable II (4-core VCTF cable)
JIS C 3306, Nominal cross-section (conductor diameter): 0.75 mm
Finished diameter: 2.3 mm
DCA4-4F10 Flat Cable I (unsheathed cable, 4-core flat cable, UL certification)
Length: 100 m, Conductor diameter: 0.75 mm
DCA5-4F10 Flat Cable II (sheathed cable, 4-core flat cable, UL certification)
Length: 100 m, Conductor diameter: 0.75 mm
Connectors for Communications Cables
Model
DCN4-TR4 Flat Cable Trunk Line Connector for Flat Cable I (unsheathed cable)
DCN5-TR4 Flat Cable Trunk Line Connector for Flat Cable II (sheathed cable)
DCN4-BR4 Flat Cable Branch Line Connector for Flat Cable I (unsheathed cable)
DCN5-BR4 Flat Cable Branch Line Connector for Flat Cable II (sheathed cable)
DCN4-MD4 Multidrop Connector for multidrop connections
DCN4-TB4 Screw Terminal Block Adapter (for Unit connection)
Use the Screw Terminal Block Adapter to connect the communications con-
nector on a CompoNet Communications Unit, Slave, or Repeater Unit to a
terminal block. The terminals screws are M3.
Terminating Resistance
Model
Terminating Resistance for Round Cable I, terminal block type, 121 Ω
DRS1-T
DCN4-TM4 Terminating Resistance for Round Cable II, Flat Cable I, connector type,
121 Ω
Terminating Resistance for Flat Cable II, connector type, 121 Ω
DCN5-TM4
120
Turnback Cable (1 m)
You can use two Turnback Cables for each CompoNet Communications Unit.
Specifications
Specifications
Specifications
2
× 2, 0.5 mm
2
× 2, 0.5 mm
Specifications
Specifications
Appendix C
2
,
2
,
2
× 2
2
× 2