I/O Allocations to CompoNet Master Unit
Note
52
The "number of nodes" is the number of words in the Input and Output Areas
that the SmartSlice I/O Terminal uses. To find the number of words in the
Input and Output Areas, open the Configuration Window of the Communica-
tions Unit and click the I/O Map Tab. The tab page will show the number of
words in the Input Area and the Output Area.
Number of words in Input Area
Number of words in Output Area
4. Click the General Tab, and then click the Transfer [PC to Unit] Button.
The CX-Integrator will start to download the parameters.
5. Click the OK Button to complete the procedure.
Section 5-3