Starting Communications
7-4
Starting Communications
7-4-1
Making the I/O Tables
7-4-2
Starting the SmartSlice System
This section tells you how to make the I/O tables, start the system, and start
communications.
You must make I/O tables in the CPU Unit of the CompoNet Master Unit. The
I/O tables show the Units in the PLC and their locations.
You use a PLC Programming Device (the CX-Programmer or a Programming
Console) to make the I/O tables.
Refer to the manual for the Master Unit for more information.
Turn ON the Unit power supply and I/O power supply to the CompoNet Com-
munications Unit.
Section 7-4
87