Allocating I/O With The Cx-Integrator - Omron GRT1-CRT - 05-2008 Operation Manual

I/O Allocations to CompoNet Master Unit
5-3-4

Allocating I/O with the CX-Integrator

1,2,3...
You can use the CX-Integrator to set I/O allocations. Use this procedure.
1. Start the CX-Integrator.
2. Double-click the icon of the CompoNet Master Unit. (In the Maintenance
Mode Window, right-click the icon and select Parameter − Edit.)
The Configuration Window will show.
3. Click the Software Setting Table Tab and set the areas, addresses, and
number of nodes for word outputs and word inputs. The area is the mem-
ory area in the CPU Unit and the address is the address of the first word
to allocate. "Node" is the number of words in the Input or Output Area.
If status words are necessary, set them too.
Section 5-3
51