Monitoring The Unit Conduction Time; Setting The Threshold - Omron GRT1-CRT - 05-2008 Operation Manual

Unit Conduction Time Monitor
6-8-1

Monitoring the Unit Conduction Time

1,2,3...
6-8-2

Setting the Threshold

1,2,3...
72
1. Start the CX-Integrator.
2. Right-click the icon of CompoNet Communications Unit and select Main-
tenance Information. (From the Maintenance Mode Window, double-click
the icon.) The Monitor Window will show.
You can monitor the Unit Conduction Time on the General Tab Page.
3. Click the Close Button to complete the procedure.
1. Start the CX-Integrator.
2. Double-click the icon of the CompoNet Communications Unit. (In the Main-
tenance Mode Window, right-click the icon and select Parameter − Edit.)
The Configuration Window will show.
Section 6-8