Showing The Settings - Omron GRT1-CRT - 05-2008 Operation Manual

Software Setting of I/O Allocations
6-7-3

Showing the Settings

1,2,3...
Note
You can use the CX-Integrator to show the Unit configuration (including
Dummy Units) as an I/O map.
1. Start the CX-Integrator.
2. Right-click the icon of CompoNet Communications Unit and select Main-
tenance Information. (From the Maintenance Mode Window, double-click
the icon.) The Monitor Window will show.
3. Click the I/O Module Tab. The Unit configuration information, including
Dummy Units, will show.
4. Click the Close Button to complete the procedure.
Click the I/O Map Tab from the Master Unit Configuration Window to show an
I/O map of the Unit configuration that is set. You can also save the Unit config-
uration in a CSV file.
Section 6-7
67