Basic Procedures - Omron GRT1-CRT - 05-2008 Operation Manual

Setting Example and Basic Procedures
7-1-2

Basic Procedures

Note
Preparing for Work
Selecting the Slice I/O Units
Making Sure That SmartSlice
Specifications Are Applicable
Hardware Connections and Settings
Installing a Slice I/O Terminal
Connecting the Communications
Cables and Power Cables
Setting the Slice I/O Terminals
Starting Communications
Making the I/O Tables
Starting the SmartSlice System
Making Sure That Operation Is Correct
Unit Indications
Doing a Check of I/O
This example tells you the most basic setting and application procedures.
For information on other settings which are necessary for system operation,
refer to the CS/CJ-series CompoNet Master Unit Operation Manual (Cat. No.
W456) and the GRT1 Series SmartSlice I/O Units Operation Manual (Cat. No.
W455).
Section 7-1
83