Table of Contents
Advertisement
Software Setting of I/O Allocations
Clearing the Software Setting Table
1,2,3...
Note
66
1. Start the CX-Integrator.
2. Double-click the icon of the CompoNet Communications Unit. (In the Main-
tenance Mode Window, right-click the icon and select Parameter − Edit.)
The Configuration Window will show.
3. Click the I/O Module Tab.
4. Click the Clear Software Configuration Table Button.
The CompoNet Communications Unit will clear the Software Setting Table.
Clear the Software Setting Table and then set it again if you change the I/O
size of any Slave (for example, changing the I/O size for the GRT1-AD2 or
GRT1-TS2P). You must also do this when you change only an I/O size and do
not change the configuration.
Section 6-7
Advertisement
Chapters
Table of Contents
