Table of Contents
Advertisement
About this Manual
Section 1
Section 2
Section 3 Installing the Units
Section 4 Connecting the Units
Section 5
Section 6 Smart Functions
Section 7 Basic Operation
Section 8
Section 9 Error Procedures
Appendices
Section
Section 1 tells you about the SmartSlice system. It also tells you
Features and System
about the features, system configuration, and specifications of the
Configuration
CompoNet Communications Unit.
Nomenclature and
Section 2 tells you about the names and functions of the parts of the
Functions
CompoNet Communications Unit.
Section 3 tells you how to install the CompoNet Communications
Unit and SmartSlice I/O Units.
Section 4 tells you how to connect the CompoNet Communications
Unit and SmartSlice I/O Units.
Unit Settings and I/O
Section 5 tells you how to set the unit address and unit number. It
Allocations
also tells how to allocate I/O in the CompoNet Master Unit.
Section 6 tells you about the many smart functions of the SmartSlice
system.
Section 7 gives the procedures for and example of operating a
SmartSlice system.
Section 8 tells you about the communications timing for remote I/O
Remote I/O Commu-
communications and message communications. It also gives more
nications
information on communications.
Section 9 tells you how to troubleshoot problems that you can have
with the CompoNet Communications Unit and SmartSlice I/O Units.
It also tells how to see the error history with the CX-Integrator.
The appendices give an overview of explicit messages (for example,
to send commands) and a list of command functions. The appendi-
ces also give lists of related products.
About this Manual
Overview
xvii
Advertisement
Chapters
Table of Contents
