Omron GRT1-CRT - 05-2008 Operation Manual page 69

I/O Allocations to CompoNet Master Unit
Doing a Check of the Communications Status with the CX-Integrator
1,2,3...
50
You can use the CX-Integrator to do a check of the communications status.
1. Start the CX-Integrator.
2. Right-click the icon of CompoNet Communications Unit and select Main-
tenance Information. (From the Maintenance Mode Window, double-click
the icon.) The Monitor Window will show.
3. Click the Status Tab. The window will show the communications status of
the SmartSlice I/O Units.
These are the meanings of the colors of the status indicators.
• Red: The Alarm Status Bit for the SmartSlice I/O Unit is ON.
• Yellow: The Warning Status Bit for the SmartSlice I/O Unit is ON.
• Blue: The SmartSlice I/O Unit is communicating as normal.
4. Click the Close Button.
Refer to the GRT1 Series SmartSlice I/O Units Operation Manual (Cat. No.
W455) for information on errors in SmartSlice I/O Units.
Section 5-3