Unit Comments
6-9-1
Reading Comments
1,2,3...
6-9-2
Writing Comments
1,2,3...
74
1. Start the CX-Integrator.
2. Right-click the icon of CompoNet Communications Unit and select Main-
tenance Information. (From the Maintenance Mode Window, double-click
the icon.) The Monitor Window will show.
The General Tab Page shows the comment.
Note
The comment shows by the icon of the CompoNet Communications Unit in
the Maintenance Mode Window.
3. Click the Close Button to complete the procedure.
1. Start the CX-Integrator.
2. Double-click the icon of the CompoNet Communications Unit. (In the Main-
tenance Mode Window, right-click the icon and select Parameter − Edit.)
The Configuration Window will show.
Section 6-9