4.2.1.15 Fault Alarm
The Industrial Managed Switch supports a Fault Alarm feature which can alert the users when there is something wrong with
the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save
time and human resource.
The Fault Alarm screen in
Figure 4-2-18
The page includes the following fields:
Object
Enable
Record
Action
Power Alarm
Port Alarm
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
appears.
Figure 4-2-18: Fault Alarm Control Configuration page Screenshot
Description
Controls whether Fault Alarm is enabled on this switch.
Controls whether Record is sending System log or SNMP Trap or both.
Controls whether Port Fail or Power Fail or both for fault detecting.
Controls whether DC1 or DC2 or both for fault detecting.
Controls which Ports or all for fault detecting.
User's Manual of WGS-5225-8P2S Series
72