Ethernet Ring Protocol Switch - Planet WGS-5225-8P2SV User Manual

4.6.2.1 Ethernet Ring Protocol Switch

This UI of ERPS is only applied to switches installed with firmware v1.44bxxxxxx
The Ethernet Ring Protection Switch instances are configured here; screen in
The page includes the following fields:
Object
 Delete
 ERPS ID
 Port 0
 Port 1
 Port 0 SF MEP
 Port 1 SF MEP
 Port 0 APS MEP
 Port 1 APS MEP
 Ring Type
Figure 4-6-3: Ethernet Ring Protocol Switch page screenshot
Description
This box is used to mark an ERPS for deletion in next Save operation.
The ID of the created Protection group, It must be an integer value between 1
and 64. The maximum number of ERPS Protection Groups that can be created
are 64. Click on the ID of an Protection group to enter the configuration page.
This will create a Port 0 of the switch in the ring.
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will
have only one ring port, "Port 1" is configured as "0" for interconnected sub-ring.
"0" in this field indicates that no "Port 1" is associated with this instance
The Port 0 Signal Fail reporting MEP.
The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 SF MEP is associated with
this instance.
The Port 0 APS PDU handling MEP.
The Port 1 APS PDU handling MEP. As only one APS MEP is associated with
interconnected sub-ring without virtual channel, it is configured as "0" for such
ring instances. "0" in this field indicates that no Port 1 APS MEP is associated
with this instance.
Type of Protecting ring. It can be either major ring or sub-ring.
User's Manual of WGS-5225-8P2S Series
Figure 4-6-3
386
appears.