Planet WGS-5225-8P2SV User Manual page 347

The page includes the following fields:
Object
 Delete
 Port
 VLAN ID & MAC
Address
 Type
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page. Note that non-committed changes will be lost.
:
Clicking
sticky MAC address to a particular interface. Once satisfied, click the Save-button to save the changes to running-config.
Notice that sticky entries are normally added
Description
Press this button to remove the entry from the MAC address table (if present)
and the running-config.
Notice that dynamic entries may be removed all-together on an interface through
"Monitor→Security→Port Security→Switch" and one-by-one through
"Monitor→Security→Port Security→Port"
The port number to which this MAC address is bound.
The VLAN ID and MAC address in question.
Indicates the type of entry and may be either Static or Sticky (see description
above).
this button
will add a new row to the table. This new row allows for adding a static or
automatically through learning on the interface.
347
User's Manual of WGS-5225-8P2S Series