Planet WGS-5225-8P2SV User Manual page 328

 Other Info
Tx Timeouts
This section contains information about the state of the server and the latest round-trip
time.
Name RFC4670 Name
IP Address -
State -
Round-Trip radiusAccClientExtRo
328
User's Manual of WGS-5225-8P2S Series
retransmission.
radiusAccClientExt The number of accounting
Timeouts timeouts to the server. After a
timeout, the client may retry to
the same server, send to a
different server, or give up. A
retry to the same server is
counted as a retransmit as
well as a timeout. A send to a
different server is counted as
a Request as well as a
timeout.
Description
IP address and UDP port for the accounting
server in question.
Shows the state of the server. It takes one of
the following values:

Disabled: The selected server is
disabled.

Not Ready: The server is enabled, but IP
communication is not yet up and running.

Ready: The server is enabled, IP
communication is up and running, and the
RADIUS module is ready to accept
accounting attempts.

Dead (X seconds left): Accounting
attempts were made to this server, but it
did not reply within the configured
timeout. The server has temporarily been
disabled, but will get re-enabled when the
dead-time expires. The number of
seconds left before this occurs is
displayed in parentheses. This state is
only reachable when more than one
server is enabled.

The time interval (measured in