Table of Contents
Advertisement
4.3.13.5 LLDP Neighbor
This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an
LLDP neighbor is detected. The LLDP Neighbor Information screen in
The page includes the following fields:
Object
Local Port
Chassis ID
Remote Port ID
Port Description
System Name
System Capabilities
Management Address
: Click to refresh the page immediately.
Auto-refresh
:
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Figure 4-3-81: LLDP Neighbor Information Page Screenshot
Description
The port on which the LLDP frame was received.
The Chassis ID is the identification of the neighbor's LLDP frames.
The Remote Port ID is the identification of the neighbor port.
Port Description is the port description advertised by the neighbor unit.
System Name is the name advertised by the neighbor unit.
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for
instance hold the neighbor's IP address.
User's Manual of WGS-5225-8P2S Series
Figure 4-3-81
appears.
228
Advertisement
Table of Contents
