1.4 Product Features
Physical Port
8 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE 802.3at/af PoE Injector function
2 1000/2500BASE-X SFP slots for SFP type auto detection
Power over Ethernet
■ Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
■ Backward compatible with IEEE 802.3af Power over Ethernet
■ Up to 8 ports of IEEE 802.3af/802.3at devices powered
■ Supports PoE power up to 36 watts for each PoE port
■ 240-watt PoE budget
■ Auto detects powered device (PD)
■ Circuit protection prevents power interference between ports
■ Remote power feeding up to 100 meters in standard mode and 250m in extend mode
■ PoE management
Total PoE power budget control
Per port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limitation
PoE delay
PD classification detection
■ Intelligent PoE features
PD alive check
PoE schedule
PoE extension
Industrial Case and Installation
■ Compact size with fixed wall-mounted, magnetic wall-mounted or DIN-rail design
■ IP30 metal case
■ Supports -40 to 75 degrees C operating temperature (WGS-5225-8P2S)
■ Supports -20 to 70 degrees C operating temperature (WGS-5225-8P2SV)
■ Supports ESD 6KV DC Ethernet protection
■ Dual power input design
48V~54V DC wide power input with reverse polarity protection
-
3-pin terminal block or DC jack connector
-
Layer 2 Features
Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
Storm Control support
Broadcast/Multicast/Unicast
User's Manual of WGS-5225-8P2S Series
22