2.1.2 LED Indications
WGS-5225-8P2S/WGS-5225-8P2SV
System
LED
Color
PWR
Green
SYS
Green
Ring
Green
R.O.
Green
Per 10/100/1000BASE-T Port
LED
Color
LNK/ACT
Green
PoE
Orange
Per SFP Interface
LED
Color
1G/2.5G
Green
LNK/ACT
100
Orange
LNK/ACT
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Switch has enabled Ring Owner.
Lights: To indicate the link through that port is successfully established.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate the port is providing DC in-line power.
Off:
To indicate the connected device is not a PoE Powered Device (PD)
To indicate the link through that port is successfully established at
Lights:
1000/2500Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
Lights: To indicate the link through that port is successfully established at 100Mbps.
Blinks: To indicate that the switch is actively sending or receiving data over that port.
User's Manual of WGS-5225-8P2S Series
Function
Function
Function
33