RADIUS Accounting Statistics
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB. Use the server select box to switch
between the backend servers to show details for.
Object
Packet Counters
IP Address
-
State
-
Round-Trip
radiusAuthClient
Time
ExtRoundTripTim
e
Description
RADIUS accounting server packet counter. There are five receive and four transmit
counters.
Direction
Name
Rx
Responses
326
User's Manual of WGS-5225-8P2S Series
IP address and UDP port for the authentication
server in question.
Shows the state of the server. It takes one of the
following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP
communication is not yet up and running.
Ready: The server is enabled, IP communication
is up and running, and the RADIUS module is
ready to accept access attempts.
Dead (X seconds left): Access attempts were
made to this server, but it did not reply within the
configured timeout. The server has temporarily
been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left
before this occurs is displayed in parentheses.
This state is only reachable when more than one
server is enabled.
The time interval (measured in milliseconds)
between the most recent Access-Reply/Access-
Challenge and the Access-Request that matched it
from the RADIUS authentication server. The
granularity of this measurement is 100 ms. A value of
0 ms indicates that there hasn't been round-trip
communication with the server yet.
RFC4670 Name
Description
radiusAccClientExt
The number of RADIUS
Responses
packets (valid or invalid)
received from the server.