Planet WGS-5225-8P2SV User Manual page 405

 Power Allocation[W]
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
PoE Extended Function
In the "Extended" operation mode, the WGS-5225-8P2S Series operates on a per-port basis at 10Mbps duplex operation but
can support PoE power output over a distance of up to 250 meters overcoming the 100 meters limit on Ethernet UTP cable.
The priority is used in case the total power consumption is over the total power
budget. In this case, the port with the lowest priority will be turned off, and power
for the port of higher priority will be offered.
It can limit the port PoE supply wattage. Per port maximum value must be less
than 36W watts; total ports values must be less than the Power Reservation
value. Once power overload is detected, the port will automatically shut down
and continue to be in detection mode until Pad's power consumption is lower
than the power limit value.
405
User's Manual of WGS-5225-8P2S Series