Buttons
: Click to add Flow Meter entry.
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
User's Manual of WGS-5225-8P2S Series
Manage Enable Sender ID TLV and send Management address (IPv4
Address).
ChassisManage Enable Sender ID TLV and send both Chassis ID
(MAC Address) and Management Address (IPv4 Address).
Defer Let the global configuration decide if Sender ID TLVs shall be
included (may be overridden in service).
Port Status: Include or exclude Port Status TLV in CCMs generated by
this Domain or let higher level determine (may be overridden in
Service).
Disable Do not include Port Status TLVs.
Enable Include Port Status TLVs.
Defer Let the global configuration decide if Port Status TLVs shall be
included (may be overridden in Service).
Interface Status: Include or exclude Interface Status TLV in CCMs
generated by this Domain or let higher level determine (may be
overridden in Service).
Disable Do not include Interface Status TLVs.
Enable Include Interface Status TLVs.
Defer Let the global configuration decide if Interface Status TLVs shall
be included (may be overridden in Service).
Org. Specific: Exclude Organization-Specific TLV in CCMs generated
by this Domain or let higher level determine (may be overridden in
Service).
Disable Do not include Organization-Specific TLVs.
Defer Let the global configuration decide if Organization-Specific TLVs
shall be included (may be overridden in Service).
255