4.2.2.6 SNMPv3 Communities
Configure SNMPv3 communities table on this page. The entry index key is Community. The SNMPv3 Communities screen in
Figure 4-2-25
appears.
The page includes the following fields:
Object
Delete
Community Name
Community Secret
Source IP
Source Prefix
Buttons
: Click to add a new community entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-2-25: SNMPv3 Communities Configuration Page Screenshot
Description
Check to delete the entry. It will be deleted during the next save.
Indicates the security name to map the community to the SNMP Groups
configuration. The allowed string length is 1 to 32, and the allowed content is
ASCII characters from 33 to 126.
Indicates the community secret (access string) to permit access using SNMPv1
and SNMPv2c to the SNMP agent. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
Indicates the SNMP access source address. A particular range of source
addresses can be used to restrict source subnet when combined with source
prefix.
Indicates the SNMP access source address prefix.
User's Manual of WGS-5225-8P2S Series
80