Table of Contents
Advertisement
The page includes the following fields:
General Settings
Object
Port
UDLD Mode
Message Interval
Buttons
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
Description
Port number of the switch.
Configures the
UDLD
mode on a port. Valid values
are Disable, Normal and Aggressive. Default mode is Disable.
Disable: In disabled mode, UDLD functionality doesn't exists on port..
Normal: In normal mode, if the link state of the port was determined to be
unidirectional, it will not affect the port state.
Aggressive: In aggressive mode, unidirectional detected ports will get
shutdown. To bring back the ports up, need to disable UDLDon that port
Configures the period of time between
in the advertisement phase and are determined to be bidirectional. The range is
from 7 to 90 seconds(Default value is 7 seconds)(Currently default time interval
is supported, due to lack of detailed information in RFC 5171).
239
User's Manual of WGS-5225-8P2S Series
UDLD
probe messages on ports that are
Advertisement
Table of Contents
