4.2.6 Industrial Protocol
With the supported Modbus TCP/IP protocol, the Industrial Managed Switch can easily integrate with SCADA
systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the
industrial Ethernet switch's operating information, port information and communication status, thus easily achieving
enhanced monitoring and maintenance of the entire factory.
4.2.6.1 Protocol Configuration
The Industrial Protocol Configuration are configured here; screen in
The page includes the following fields:
Object
Modbus TCP Mode
Buttons
: Click to apply changes
Figure 4-2-47: Protocol Configuration Page Screenshot
Description
Indicates the modbus TCP mode operation.
When the mode operation is enabled, the modbus TCP protocol will be
activated. The modbus TCP protocol is based on TCP communication and
received on TCP port 502. Possible modes are:
Enabled: Enable modbus TCP mode operation.
Disabled: Disable modbus TCP mode operation.
107
User's Manual of WGS-5225-8P2S Series
Figure 4-2-47
appears.