4.3.17.2 Port Status
This page provides Link OAM configuration operational status. The displayed fields shows the active configuration status for
the selected port. as well. as screen in
The page includes the following fields:
General Settings
Object
PDU Permission
Discovery State
Mode
Figure 4-3-90
appears.
Figure 4-3-90: Port Status Page Screenshot
Description
This field is available only for the Local DTE.
It displays the current permission rules set for the local DTE. Possible values are
Link fault
Receive only
Information exchange only
ANY
Displays the current state of the discovery process.
Possible states are
Fault state
Active state
Passive state
SEND_LOCAL_REMOTE_STATE
SEND_LOCAL_REMOTE_OK_STATE
SEND_ANY_STATE
The Mode in which the Link OAM is operating, Active or Passive.
243
User's Manual of WGS-5225-8P2S Series