4.3.19.2 sFlow Statistics
This page shows receiver and per-port
Receiver Statistics
Object
Owner
IP Address/Hostname
Timeout
Tx Successes
Tx Errors
sFlow
statistics.
Figure 4-3-106: sFlow Statistics
Description
This field shows the current owner of the sFlow configuration. It assumes one of
three values as follows:
• If sFlow is currently unconfigured/unclaimed, Owner contains <none>.
• If sFlow is currently configured through Web or CLI, Owner
contains <Configured through local management>.
• If sFlow is currently configured through SNMP, Owner contains a string
identifying the sFlow receiver.
The IP address or hostname of the sFlow receiver.
The number of seconds remaining before sampling stops and the current sFlow
owner is released.
The number of UDP datagrams successfully sent to the sFlow receiver.
The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver
IP/hostname configuration. To diagnose, paste the receiver's IP
address/hostname into the Ping Web page (Diagnostics → Ping/Ping6).
266
User's Manual of WGS-5225-8P2S Series