Aps Status - Planet WGS-5225-8P2SV User Manual

4.6.4.3 APS Status

This shows the current status of the APS instances; screen in
The page includes the following fields:
Instance Data:
Object
 APS #
 State/ Operational
Figure 4-6-10
Figure 4-6-10: Detail APSconfiguration page screenshot
Description
The ID of the APS. Maximum number of creatable APS instances is 10 . Click on
link to get to APS instance page, you can reset counters and issue commands.
he operational state of the APS instance. There are many ways to not have the
instance active. Each of them has its own value. Only when the state is Active,
will the APS instance be active and up and running. If the Operational state is
not "Active", the remaining fields are invalid. The possible values of this field are
shown below:
Administratively disabled: Instance is inactive, because it is administratively
disabled.
Active: The instance is active and up and running.
Internal Error: Instance is inactive, because an internal error has occurred.
Working MEP not Found:Instance is inactive, because the Working MEP is not
found.
Protecting MEP not Found: Instance is inactive, because the Protecting MEP
is not found.
Working MEP is not administrative active: Instance is inactive, because the
Working MEP is not admin enabled.
Protecting MEP is not administrative active: Instance is inactive, because the
Protecting MEP is not admin enabled.
Working MEP is not a Down MEP: Instance is inactive, because the Working
MEP is not a Down-MEP.
Protecting MEP is not a Down MEP: Instance is inactive, because the
Protecting MEP is not a Down-MEP.
Working and Protecting MEP use the same interface: Instance is inactive,
because both Working and Protecting MEPs use the same I/F.
399
User's Manual of WGS-5225-8P2S Series
appears.